F1 Longitudinal Acceleration vs Speed
About this chart
What it shows. Each selected driver's fastest lap of the session as a cloud of points, one per telemetry sample, placing the car's speed against how hard it was speeding up or slowing down at that moment. An outline in the driver's colour wraps each cloud, so you can compare the limits each car reached.
How to read it. The horizontal axis is speed in km/h. The vertical axis is longitudinal acceleration in g (1 g = 9.81 m/s²): points above zero are the car gaining speed, points below zero are braking. Each driver has one colour, named in the legend. Points are semi-transparent, so dense areas show where the car spent most of the lap. Nothing is drawn until you pick at least one driver.
What to look for. The lower edge of an outline is braking. F1 cars brake hardest at the highest speeds, when downforce presses them into the track, so that edge drops away to the right. The upper edge is traction and power: limited by grip at low speed and by drag at high speed, it falls as speed rises. If one driver's outline reaches lower at 250–300 km/h, they braked harder from top speed on that lap; a taller upper edge at low speed hints at better traction out of slow corners.
Data and caveats. Telemetry from the official F1 timing feed, processed with FastF1 and published by TracingInsights. Acceleration is not measured directly: it is calculated from the speed trace with a smoothing filter, and spikes above 7.5 g are discarded as noise. The chart covers one lap per driver, not the whole session, so a scruffy fastest lap or a slipstream can shift the picture.