P3 And Qualifying Scrutineering
Time 10:30 2022 FRENCH GRAND PRIX 21 - 24 July 2022 The FIA Formula One Media Delegate Title Automobile Display Procedure · 2022 · 23 July 2022 · Doc 37
From The FIA Formula One Technical Delegate
To The Stewards Document 37 Date 23 July 2022
Time 19:38
2022 FRENCH GRAND PRIX 21 - 24 July 2022
Technical Delegate's Report
During the third free practice session:
The tyre starting pressures of all cars during P3 were checked.
The engine high rev limit bands were checked on all cars.
The fuel flow meter calibration checksum was checked on all cars.
The instantaneous fuel mass flow of all cars was checked.
The fuel temperature of all cars was checked.
The fuel pressure of all cars during the qualifying session was checked.
The logged pressure within the engine cooling system during the qualifying session was checked on all cars.
The tyres used by all drivers during the sessions today have been checked.
The plenum temperature of all cars was checked.
The IVT temperatures were checked on all cars.
The ES state of charge on-track limits were checked on all cars.
The lap energy release and recovery limits were checked on all cars.
The MGU-K power limits were checked on all cars.
The maximum MGU-K speed was checked on all cars.
The maximum MGU-K torque was checked on all cars.
The maximum MGU-H speed was checked on all cars.
Torque sensor software version checks have been carried out on all cars.
Torque sensor calibration checks have been carried out on all cars.
The SECU custom software versions were checked on all cars.
Before the qualifying practice session:
It was confirmed for all cars that the gear ratios used during the remainder of this Event belong to the gear ratios declared to the FIA technical delegate at or before the first Event of the 2022 Championship.
During the qualifying practice session:
Car numbers 44, 01, 03, 14, 31, 22, 05 and 24 were weighed.
The weight distribution was checked on car numbers 44, 01, 03, 14, 31, 22, 05 and 24.
The uppermost rear wing element adjustable positions were checked on car numbers 03, 10, 18, 23 and 24.
The tyre starting pressures of all cars during the qualifying sessions were checked.
After the qualifying practice session:
Car numbers 63, 44, 01, 11, 16, 55, 04, 14, 22 and 20 were weighed.
The following aerodynamic component or bodywork areas were checked on car numbers 63, 01 and 16:
- Floor Body - TR Article 3.5.1 - Floor Fences - TR Article 3.5.2 - Floor Edge Wing - TR Article 3.5.3 - Nose - TR Article 3.6.1 - Forward Chassis - TR Article 3.6.2 - Mid Chassis - TR Article 3.6.3 - Sidepod - TR Article 3.7.1 - Coke Panel - TR Article 3.7.2
- Engine Cover - TR Article 3.7.3 - Front Wing Endplate body - TR Article 3.9.2 - Front Wing Tip - TR Article 3.9.3 - Front Wing Diveplane - TR Article 3.9.4 - Front Wing Endplate - TR Article 3.9.5 - Rear Wing Profiles - TR Article 3.10.1 - Rear Wing Beam - TR Article 3.10.3 - Rear Wing Endplate Body - TR Article 3.10.4 - Rear Wing Tip - TR Article 3.10.5 - Rear Wing Endplate - TR Article 3.10.7
The uppermost rear wing element adjustable positions were checked on car numbers 63, 44, 11, 16, 55, 04, 14, 22 and 20.
The engine high rev limit bands were checked on all cars.
The plenum temperature was checked on all cars.
The IVT temperatures were checked on all cars.
The ES state of charge on-track limits were checked on all cars.
The lap energy release and recovery limits were checked on all cars.
The MGU-K power limits were checked on all cars.
The maximum MGU-K speed was checked on all cars.
The maximum MGU-K torque was checked on all cars.
The maximum MGU-H speed was checked on all cars.
The MGU-K power model was checked on all cars.
The session type has been confirmed for all cars.
Chassis FIA checksum was checked on all cars taking part in the qualifying sessions.
Torque sensor software version checks have been carried out on all cars.
Torque sensor calibration checks have been carried out on all cars.
The torque coordinator demands were checked on all cars.
The torque control was checked on all cars.
The rear brakes pressure control was checked on all cars.
The steering wheel of all cars has been checked.
It was verified on all cars that the PCU dash board display configuration was not changed.
Custom software version checks have been carried out on all cars.
SECU software version checks have been carried out on all cars.
The fuel pressure of all cars during the qualifying session was checked.
The logged pressure within the engine cooling system during the qualifying session was checked on all cars.
The tyres used by all drivers during the sessions today have been checked.
Fuel flow meter calibration checksums were checked on all cars.
The instantaneous fuel mass flow of all cars was checked.
The fuel temperature of all cars was checked.
The following SECU software versions have been used by the teams during the qualifying sessions:
Team FIA Standard ECU system version
Mercedes-AMG Petronas Formula One Team SR 1415 Oracle Red Bull Racing SR 1416 Scuderia Ferrari SR 1416 McLaren F1 Team SR 1415 BWT Alpine F1 Team SR 1416 Scuderia AlphaTauri SR 1416 Aston Martin Aramco Cognizant Formula One Team SR 1415